P35 Splinker

Full circle impact sprinkler low and medium flow Brass

Application

For agricultural use with medium flows, it has a sand-proof bearing system and can be assembled with one or two nozzles. High resistance with a compact design, its reversing system allows it to be changed in seconds into a full circle sprinkler. Suitable for areas bordering or near elements that should not get wet.

Advantages

• Made of brass, its arm and body share a wide impact area that provides longer life.
• Its counterweighted arm will provide a steady turn speed.
• Its exclusive reversing system is also sand-proof and can be easily disassembled for cleaning or maintenance when needed.
• It can be assembled with one or two nozzles.
• Three different vanes can be used to achieve the desired coverage and spray balance according to the available system pressure.

Technical specifications

• Double use impact sprinkler: 30º to 300ª part circle, or full circle.
• ¾” base thread male.
• -Main and secondary nozzle
• 25º nozzle trajectory angle.
• -Pressure range: 20-80 PSI
• -Nozzle range: 9/64”-7/32”
• -Body, arm and bearing assembly made of brass.
• Fulcrum pin and cams, reversing pin and springs made of stainless steel.
• Color-coded anti abrasive acetal resin nozzles carved in millimetres and inches for a better identification (brass nozzles to be optionally assembled).
• Backturn lock between the sprinkler body and the bearing spring.