F46 PROTECTED Sprinkler

Full circle Impact Sprinkler Low and Medium flow Plastic

Application

Like F46, this sprinkler was designed for general agricultural use and, because of its low cost, it is suitable for solid sets where the amount of sprinklers per hectare is high.

Suitable for frost-proof irrigation. There are two key differences from F46: absence of counterweights in the swing arm and protection of the most sensitive areas of the sprinkler, making it more robust and durable.

Advantages

• Maximum protection of springs against impacts, dirt, foreign bodies, insects and animals, frost, etc.
• Increased frequency / speed of arm swing, improving irrigation uniformity.
• Suitable for frost-proof irrigation.
• It features a sand-proof bearing system and reinforcing ribs on its body.
• Perfect interior finishing.
• It can be assembled with one or two nozzles. Sprinkler body adapted to accept the 3Q bayonet nozzle and the thread nozzle
• This model allows using three different vanes can be used to achieve the desired coverage and spray balance according to the available system pressure.

Technical specification

• Full circle impact sprinkler.
• ¾” base thread male or female( F46F)
• Dual nozzle, Main and secondary nozzle
• 23º nozzle trajectory angle
• Pressure range: 20-80 PSI
• Nozzle range: 7/64”-7/32”
• Made of acetal resin with UV-protection treatment.
• Body and spring protective cap made of HDPE.
• fulcrum pin and springs made of stainless steel.
• Expanded fulcrum pin upper end diameter for a better fitting into the sprinkler body.
• Color-coded anti abrasive acetal resin nozzles carved in millimeters and inches for a better identification.
• Bearing body protective cap made of HDPE between the sprinkler body and the compression spring.
• F46L (Low pressure model)