SP4 Spray

Application

Fixed sprayhead designed to equip travelling irrigation systems, such as CENTER PIVOTS or LINEAR MOVES.

Advantages

• Nozzle system easy to change.
• Long wear life components.

Technical specifications

• It's composed by just three parts: body, wearpad and nozzle. The body is made of fiber-glass reinforced polyamide and treated for protection against the UV radiation. The wearpad is made of antiabrasive polyurethane. It provides an almost unlimited durability. The nozzle is made of brass. A wide range on nozzle sizes will help achieving the desired flow.
• Large nozzle range.
• There are five different wearpads that can be used with the SP4, including 180° part circle one:

                o             Grooved Flat (PL/R): The standard wearpad can be used on drops or on top of the pipe. Up from 20 psi working pressure.

                o             Smooth Flat (PL/L): The alternative to the PL/R when the working pressure is not enough (10-15 psi).

                o             Grooved Convex (CVX/R): This derivation of the PL/R was specially designed to work on top of the pipe, as its convexity will improve the throw radius.

                o             Smooth Convex (CVX/L): Just as the PL/L, this is the low pressure alternative to the CVX/R.

                o             180° Grooved Flat (PL/R 180°): Half circle Grooved Flat wearpad. Perfect to prevent water from reaching control boxes or wheels.