MP5 Spray

Application

Fixed spray head designed to equip self-propelled irrigation systems, such as CENTER PIVOTS or LATERAL. High resistance and durability, and excellent performance in adverse conditions. Thanks to its modularity, it can adapted to various kind of crops just by changing the plate. It can also be installed in center pivots in which there are components or areas that must not get wet, with a plate limiting the irrigated area to 180º.

Advantages

• With a total of 45 available nozzle sizes, it guarantees the highest water application precision when preparing the Center Pivot or Lateral.
• Easy identification: each nozzle is identified by a colour and its size is carved in two of the three raised fins.
• The ring of the corresponding complementary colour is pre-fitted to the body of the nozzle, avoiding screen-printing, which disappears over time and with the action of sunlight.
• Thanks to his three-legged body, together with the leak-proof pads, greater distribution of water in the close-in area is achieved
• The plate-holder can hold a different plate on each side, allowing the water distribution pattern to be changed just by flipping the plate-holder.
• The pads have been designed for an efficient water distribution across the irrigation machines, combined with a wide range and unbeatable uniformity.

Technical specifications

• Modular Spray.
• ¾” M base thread.
• Leak-Proof Pad.
• Pressure range: 6-50 PSI (0,42 - 4,14 kg/cm2).
• Nozzle range: #8(1/16”-1.59mm) - #52 (13/32”-10.32mm.)
• Three legged body.
• Highy-resistant UV-treated thermoplastic.
• Capacity to mount two plates on the same unit.
• Coarse Groove (RG) for a standard irrigation, and Smooth Groove (RF) for germination and sensitive crops that require smaller droplets.
• Easy identification of nozzle sizes.
• Easy maintenance required, can be disassembled without any tools.