Feedtube Assembly

Application

Because of its resistant and rugged design, it is specially suitable for irrigation coverage , either high or low crop. It can be adapted to the height required between 1, 1.2 or 1.5 meters.

This adjustment allows adaptation to the growth of the crop.

Built in solid material, it can remain a long time in the field or rather, because of its light weight, it can be mobilized on the ground.

Advantages

• Tough and reliable design feedtube assembly.
• Flexible PVC tube and zinced steel stake with both ends beveled.
• Its Lateral Takeoff fittings (LTO), with a minimum inner diameter of 0.315” (8mm), duplicates the section of any other of its kind, allowing a much higher flow per sprinkler, eliminating the need for higher water pressure, therefore saving energy.
• Owing to the three barbs that grip the tube, one internal and two external, its fittings need no ties, as undesired disassembling is virtually impossible. This will allow unplugging the assembly from the line just by pulling the tube.
• The red color of its female LTO fitting helps locating it on the pipe easily, and its flat and slim head design does not make winding the line back into the coil difficult after season use.

Technical specifications

• Composed by three UV radiation protected polypropylene part plus a:
  • ½”- Ø10mm x 8mm Female Adapter.
  • Ø 10mm Male LTO fitting.
  • Ø 10mm Female LTO fitting.                                     
• Ø 13mm x 9.4mm flexible PVC tube, sizes: 1m, 1.2m, 1.5m.
• Ø 8mm zinced steel stake, sizes: 1m, 1.2m, 1.5m.
• Minimum inner diameter of LTO fittings or adapter is 0.315” (8mm).
• No ties needed. Tube gripped by one internal and two external barbs.
• Red color of female LTO fitting to make finding it on the line easy, and flat and slim head design to grant pipe winding back into coil.
• Ø10 mm plug (Optional).